Direct-Pure UP Lab Water Systems


Direct-Pure UP produces ultrapure and RO water from tap water directly.

Regular Systems:RD1P0100E, RD1P0200E, RD1P0300E, RD1P0500E;

Systems with UV:RD1P010UE, RD1P020UE, RD1P030UE, RD1P050TE;

UV Systems with dispenser: RD1PP10UE, RD1PP20UE, RD1PP30UE, RD1PP50TE;

Systems with TOC: RD1PP10TE, RD1PP20TE, RD1PP30TE, RD1PP50TE;

Standard sets: RD1P0100EK, RD1P010UEK, RD1PP10UEK, RD1PP10TEK, RD1P0200EK, RD1P020UEK, RD1PP20UEK, RD1PP20TEK, RD1P0300EK, RD1P030UEK, RD1PP30UEK, RD1PP30TEK, RD1P0500EK, RD1P050UEK, RD1PP50UEK, RD1PP50TEK

Select a standard set:


Direct-Pure UP Water System produces type I ultrapure water and RO water directly from tap water in one single system. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

General specifications 
Feed*Municipal water, TDS < 1000 ppm ( 2000 μS/cm )
ProductUltrapure & RO pure water
Feed water pressure1 - 6 bar (15 - 90 psi)
RO prod. rate (L/h)10 to 50 L/h at 25℃
Dispensing rateUp to 2.0 L/min
RO conductivity**( @ 25℃ )Typically < 20 μS/cm
Ultrapure water resistivity ( @ 25℃ )18.2 MΩ·cm
Ultrapure water TOC < 10 ppb (< 5 ppb with a dual wavelength UV lamp)
Particles in ultrapure water ( > 0.2 μm)No particles ( with a 0.2 μm final filter or RephiBio filter)
Microorganisms< 0.01 cfu/ml ( with a 0.2 μm final filter or RephiBio filter)
Pyrogens (endotoxins)< 0.001 Eu/ml (with a RephiBio filter)
RNase< 0.5 pg/ml (with a RephiBio filter)
DNase< 10 pg/ml (with a RephiBio filter)
Main system Length x Depth x Height 30 cm × 51 cm ×48 cm
Net Weight (Operating Weight) 22 - 25 kg (25 - 32 kg)
Power < 150 W

* If water hardness is less than 180 ppm, RephiLe suggests using RephiTEKT RW50211KT.

If water hardness is greater than 180 ppm, RephiLe suggests using additional water softening device to protect the RO membrane in your system.

** Product water quality may vary depending on local feed water conditions.


For more information >>

Direct-Pure UP Sets

You can either choose consumables & accessories to work with a water system based on your individual requirements or just select one standard kit set. Details of the set are described below.

A Direct-Pure UP Set includes:

Main system; Prefiltration kit; RO membrane(s); Two cartridges(H pack & U pack) and a final filter; 30L tank and vent filter; Leak protector.

UV lamp (RAUV357B1)is preinstalled for all UV systems.  Systems with TOC or a dispenser are available. Any questions as to the following kits:   RD1PP10UEK, RD1PP10TEK, RD1PP20UEK, RD1PP20TEK, RD1PP30UEK, RD1PP30TEK, RD1PP50UEK, RD1PP50TEK, please contact your local sales representative or distributors.

RO Prod. Rate(L/h)10203050
It includes:
RR300Q2011111H Pack
RR600Q2KT1111U Pack kit
RATANK030111130L Tank
RATANKVN11111Tank Vent Filter
RW10311KT111110 inch Prefiltration Kit
RAPRC01111111Leak Protector
RAR0100HG12RO Membrane (10 L/h)
RAR0015HG2RO Membrane (15 L/h)
RAR0B50HG1RO Membrane (50 L/h)


Ask For Quotation

Make your selections below: