Direct-Pure UP Water System produces type I ultrapure water and RO water directly from tap water in one single system. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.
|Feed*||Municipal water, TDS < 1000 ppm ( 2000 μS/cm )|
|Product||Ultrapure & RO pure water|
|Feed water pressure||1 - 6 bar (15 - 90 psi)|
|RO prod. rate (L/h)||10 to 50 L/h at 25℃|
|Dispensing rate||Up to 2.0 L/min|
|RO conductivity**( ＠ 25℃ )||Typically < 20 μS/cm|
|Ultrapure water resistivity ( ＠ 25℃ )||18.2 MΩ·cm|
|Ultrapure water TOC||< 10 ppb (< 5 ppb with a dual wavelength UV lamp)|
|Particles in ultrapure water ( > 0.2 μm)||No particles ( with a 0.2 μm final filter or RephiBio filter)|
|Microorganisms||< 0.01 cfu/ml ( with a 0.2 μm final filter or RephiBio filter)|
|Pyrogens (endotoxins)||< 0.001 Eu/ml (with a RephiBio filter)|
|RNase||< 0.5 pg/ml (with a RephiBio filter)|
|DNase||< 10 pg/ml (with a RephiBio filter)|
|Main system Length x Depth x Height||30 cm × 51 cm ×48 cm|
|Net Weight (Operating Weight)||22 - 25 kg (25 - 32 kg)|
|Power||< 150 W|
* If water hardness is less than 180 ppm, RephiLe suggests using RephiTEKT RW50211KT.
If water hardness is greater than 180 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.
** Product water quality may vary depending on local feed water conditions.